SMART Board MX, Руководство пользователя, Страница: 17 / 51

Chapter 2 Using basic features
smarttech.com/kb/171554 17
SMART Board MX (V3, V2 and V2-C) series
The image and table below list the remote control’s functions.
No. Name Procedure
1
Power
l
Press to enter or exit Standby mode (see
Waking up the display
and putting it back to sleep on page 14).
Note
Touch is not available right after waking up the display or
turning it on. Wait a few seconds and then the display will
respond to touch.
l
Press and hold for four seconds to turn off the display.
2 Home Open the iQ Home screen (see
Using the Home button
on
page 15).
3 Up and down
buttons Select a menu option in the settings.
4 OK Select menu option in the settings.
5 Left and right
buttons Change the value of the selected setting.