SMART BOARD 8055i-G5, Руководство администратора

Страница: 31 / 84

Chapter 4
21 smarttech.com/kb/171000
Chapter 4: Setting up the interactive flat panel
Turning on the interactive flat panel and room computer for the first time 21
Installing SMART Meeting Pro software 22
Switching between input sources 22
Displaying multiple input sources 22
After mounting the SMART kapp iQ Pro interactive flat panel (see Chapter 2: Mounting the
interactive flat panel on page 11) and connecting power and devices (see Chapter 3: Connecting
power and devices on page 15), you can turn on and set up the interactive flat panel.
Turning on the interactive flat panel and
room computer for the first time
Turn on the interactive flat panel after mounting it and connecting power and devices.
To turn on the interactive flat panel for the first time
1. Turn on the interactive flat panel by flicking the power switch beside the AC power inlet to the
ON (I) position.
2. Follow the on-screen instructions to calibrate the interactive flat panel.
IMPORTANT
Use your finger, rather than a pen, when calibrating the interactive flat panel.