CHAPTER 1
WELCOME
6
Indicator light
Status
Troubleshooting
Solid amber
DPMS (power management)
mode
Press the
Standby
button
to exit
DPMS mode.
Connect an input source.
Slowly flashing
amber
Standby mode
Press the
Standby
button
to exit
Standby mode.
If presence detection is enabled, move in
range of the presence detection sensor
(see page 43).
If wake-to-touch is enabled, touch the
screen (see page 45).
Flashing amber
No USB connection from the
connected computer
Verify the connections to the room
computer (see page 18).
Switch to the room computer’s input
source (see page 22).
Slowly flashing
white
SMART Board service not
running on the connected
computer
Ensure that SMART Product Drivers is
installed and that the SMART Board
service is running.
Pens with erasers
The interactive flat panel comes with two pens with erasers attached.
The interactive flat panel’s bottom frame includes magnetic holders for the pens. Removing a pen
from the holders activates it, and you can use it to draw or erase digital ink.
CAUTION
When you return the pen to the magnetic holder, make sure it’s centered in its holder to keep it
from falling and being damaged.
Содержание BOARD 8055i-G5
