SMART Board 800ix3, Конфигурация и руководство пользователя

Страница: 72 / 122

APPENDIX A
REMOTELY MANAGING THE SYSTEM THROUGH A NETWORK INTERFACE
62 smarttech.com/kb/170911
Network settings
This menu allows you to use or not use Dynamic Host Control Protocol (DHCP) and to set the
network-related addresses and names when DHCP isn’t used.
Submenu setting Description
DHCP Determines if the projector’s IP address and other network settings
are dynamically assigned by a DHCP server or are manually set.
l
On allows the network’s DHCP server to assign a dynamic IP
address to the projector.
l
Off allows you to manually set the projector’s IP address and
other network settings.
IP Address Displays or allows you to set the projector’s IP address in values
between 0.0.0.0 and 255.255.255.255.
Subnet Mask Displays or allows you to set the projector’s subnet mask number in
values between 0.0.0.0 and 255.255.255.255.
Gateway Displays or allows you to set the projector’s default network
gateway in values between 0.0.0.0 and 255.255.255.255.
DNS Displays or allows you to set the projector’s IP address for your
network’s primary domain name server in values between 0.0.0.0
and 255.255.255.255.
Group Name Displays or allows you to set the projector’s workgroup name
(maximum 12 characters).
Projector Name Displays or allows you to set the projector’s name (maximum 12
characters).
Location Displays or allows you to set the projector’s location (maximum 16
characters).
Contact Displays or allows you to set the contact name, number or email
address for projector support (maximum 16 characters).
SNMP Turns the Simple Network Management Protocol (SNMP) agent on
or off.
Read-Only Community Sets a password that is required for each SNMP get request to
the device.
NOTE
The default for Read-Only Community is public.
Read/Write Community Sets a password that is required for each SNMP set request to the
device.
NOTE
The default for Read/Write Community is private.