SMART AMC-K2001, Руководство пользователя

Страница: 9 / 40

3
A
B
OU
T
TH
E
P
R
OD
U
C
T
DIP Switches Settings
Before operating the camera, set the camera
address, DVI-I output signal format and video
format etc through DIP switches. The camera
has two DIP switches: SW1 and SW2 as
below:
Note
SW1 is used to set address, video
output and mounting type, SW2 is
used to set protocol, baud rate and
video format.
Default Settings
Address 1
Baud Rate 9600bps
Protocol VISCA
Video Format 1080i50
Analog Video Format YPbPr
Mounting Type Desktop Installation
Sw1 settings
No. 1~6 are used to set address for camera,
the DIPs adopt binary system. No. 7 is used to
set analog video format. No. 8 is used to set
mounting type. Refer to page 27 for details.
Sw2 settings
No. 1 and 2 of SW2 is used to set protocol; no.
3 and 4 is used to set baud rate; no. 5, 6, 7, 8
is used to set video output format. Refer to
below chart for details:
SW2
DIP No. 1 2
Protocol
OFF OFF VISCA
ON OFF PELCO- D
OFF ON PELCO- P
ON ON Reserved
DIP No. 3 4
Baud
Rate(bps)
OFF OFF 2400
ON OFF 4800
OFF ON 9600
ON ON 38400
DIP No. 5 6 7 8
Video
Format
OFF OFF OFF OFF 1080P60
ON OFF OFF OFF 1080P50
OFF ON OFF OFF 1080i60
ON ON OFF OFF 1080i50
OFF OFF ON OFF 720P60
ON OFF ON OFF 720P50
OFF ON ON OFF 1080P30
ON ON ON OFF 1080P25
OFF OFF OFF ON 720P30
ON OFF OFF ON 720P25
When No.5~8 is all ON, video format can be
switched by calling preset, refer to page12.
When HD video output format is set as
1080p60,1080i60 or 720p60, relative SD
video format is NTSC; when HD video output
format is set as 1080p50, 1080i50 or 720p50,
relative SD video format is PAL.