SMART 2014 fortwo, Руководство оператора

Страница: 128 / 222

cooling period of at least 30 minutes. Oth-
erwise, you could be seriously burned if hot
coolant escapes.
The coolant is a mixture of water and anti-
corrosion/antifreeze. To check the coolant
level the vehicle must be parked on level
ground and the drive system must have
cooled down. For more information, see
„Coolants“ (
Y
page 219).
The battery coolant reservoir is located in
the front compartment on the driver’s side.
i
The coolant expansion tank for the bat-
tery‑ and drive system cooling is located
in the front compartment on the left-hand
side in the direction of travel.
Checking coolant level
X
Allow the coolant to cool down for at least
30 minutes.
X
Remove the service flap and insert it on
the front of the vehicle (
Y
page 123).
X
Perform a visual check of the fluid level
in coolant reservoir ; .
The coolant level must be between the
markings MAX and MIN.
X
If necessary, add coolant.
Adding coolant
X
Cover pressure cap : with a rag.
X
Slowly turn pressure cap : approx-
imately Ö turn counterclockwise to
release any excess pressure.
X
Continue turning pressure cap : coun-
terclockwise and remove it.
X
Add coolant as required. The coolant
level may not exceed the maximum filling
level.
X
Reinstall and tighten pressure cap : .
X
Remount the service flap and close it
(
Y
page 123).
Windshield/rear window washer system
Both the windshield and the rear window
6
washer are supplied from the windshield
washer reservoir.
The recommended minimum filling level is
1.06 US qt (1.0 l).
X
Remove the service flap and insert it on
the front of the vehicle (
Y
page 123).
The windshield washer reservoir is located
in the front compartment on the driver’s
side.
G WARNING
Windshield washer concentrate is highly
flammable. Fire, naked flames and smoking
are prohibited when windshield washer
concentrate is being handled.
6
Coupé only.
126
Front compartment
>>
Operation.