Smart Technologies SMART Board 800 Series, Конфигурация и руководство пользователя

Страница: 92 / 110

Source selection controls
These commands switch input sources. The source type determines which commands can be
accepted.
Command Response Available in Standby
mode
get input input=[field] Yes
set input=[field] input=[field] No
The following table describes the source selection commands:
Command Description
get input Returns the projector’s current input.
set input=[field] Sets the input to one of the selectable fields.
The following table describes the command/response definitions for switches between different
embedded applications on the appliance:
Command Response Powered off
set application [target] application=[current] No
get application application=[current] Yes
The following table describes field definitions for switches between different embedded applications
on the appliance:
Field Possible values Description
Current application
application=whiteboard
l
whiteboard
l
web
l
pdf
l
viewscreens
The appliance is currently
running this application.
Target application
set application=whiteboard
l
whiteboard
l
web
l
pdf
l
viewscreens
The appliance is set to the
target application.
The following table describes the source selection response fields:
Field Description
VGA1 Switches source to the VGA 1 input connector.
VGA2 Switches source to the VGA 2 input connector.
Composite Switches source to the Composite video connector.
If you installed your interactive whiteboard system according to the
instructions, this is the relay from the ACP.
A P P E N D I X B
Remotely managing your system through an RS-232 serial interface
82