Smart Technologies Board SBD600 Series, Конфигурация и руководство пользователя

Страница: 5 / 86

iii | INTRODUCTION – IMPORTANT INFORMATION
WARNINGS – PROJECTOR
• Refer to the safety warnings and precautions published in the UF55/UF55w
projector manual .
• Do not stare (or allow children to stare) directly into your projector’s beam
of light. Instruct children not to look in the direction of this beam of light.
Encourage users to keep their back to the projector when working at the
interactive whiteboard. Before they turn to face the audience, users should
step sideways, out of the projector’s beam.
• Do not attempt to service the projector other than performing routine lamp
replacement. Other than the lamp module, there are no user-serviceable parts
inside the unit.
• This projector detects its own remaining lamp life. Replace the lamp when a
lamp life warning message appears. If you continue to use the projector after
the replacement message appears, the lamp might shatter or burst, scattering
glass throughout the projector head.
• If the lamp has shattered or burst:
– Call your authorized SMART reseller for instructions. Do not attempt
to replace the lamp.
– Do not touch the glass fragments because they might cause injury.
– Leave and then ventilate the area where the lamp shattered or burst.
– Wash your hands thoroughly if you have come in contact with
lamp debris.
– Thoroughly clean the area around the projector, and then discard any
edible items placed in that area because they might be contaminated.
• You must remove the projector from the projector’s boom before servicing
the lamp.
– Two people are required to remove and replace the projector.
– Replacing the lamp in a boom-mounted projector might result in a fall
or injury.
– Uncovering the lamp while the projector is mounted on the boom might
lead to product damage or personal injury from falling pieces of glass
if the lamp is broken.