APPENDIX A
-
USING THE LYNC ADMIN CONSOLE AND SMART SETTINGS
84
smarttech.com/kb/170450
Control
Procedure
Notes (if any)
Password Renewal
Auto-Renew Password
Turn On to enable automatic renewing of the
Lync account password, and then type the
number of days between renewals in the
Renewal Frequency in Days box.
OR
Turn Off to disable automatic renewing of the
Lync account password.
SMART recommends that you disable
automatic renewing of the Lync account
password.
Account Type
On-Premise
Select if your organization uses an on-premise
Lync Server.
Office 365
Select if your organization uses an Office 365™-
hosted Lync Server, and then type the
connection point in the
Office 365 Connection
Point box.
OEM Settings
SMART Settings
Press to open SMART Settings.
See
SMART Settings controls below.
SRS Licensing Tool
Press to check the status of your room system’s
product key and provide a MAK key if your Lync
infrastructure doesn’t include a KMS server.
See
Checking the status of the Lync Room
System software product key on page 34.
SMART Settings controls
Control
Procedure
Notes (if any)
SMART Room System Settings
Business Hours
12-Hour Setting
Select if your organization’s business day is 12
hours, and then select the appropriate time
frame in the drop-down list.
Your room system enters power saving
mode outside of the business hours you
define on this page.
Custom Setting
Select if your organization’s business day isn’t 12
hours, and then select the start and end times
for your organization’s business day.
Business Days
Select the days of the week your organization
operates.
SMART Hardware Settings
SMART Board
In room systems with two interactive flat
panels, there are two
SMART Board
pages under
SMART Hardware Settings
(one for each interactive flat panel).
Orient
Press to orient the interactive flat panel.
See
