In case of central mounting, use a solid tripod so that, especially with the 800 mm
SmartSLIDER PRO, the camera weight can't overturn the structure.
It's easy to mount your system also on a light stand/tripod provided with a 5/8" hole. We
recommend you to fasten the 5/8" socket using the proper two knobs on SmartSLIDER
PRO sides.
If you use SmartSLIDER PRO with more than one light stand, make sure to adjust them at
the same height.
Camera Fastening
The 4 M5 screws allow you to easily remove the plate, so you can install on Smart-
SLIDER PRO carriage a large variety of third-party accessories.
Thanks to the fluid head adapter, you
can install the most popular heads
currently on the market, which are
based on the 3/8" screw fastening
system.
To lock the carriage in the desired
position, simply tighten up the brake
knob you'll find on the carriage side.
WARNING. Make sure that your fluid head was correctly installed on
your SmartSLIDER PRO Before starting your working session. Don't
overtighten the brake knob. The leverism system already ensures
you an optimal locking system.
11
