Congratulations on the purchase of Hi Hat interface!
The Hi Hat Interface allows you to use a 100 mm or 75 mm video head on SmartSystem products
like SmartSLIDER PRO / mini or Smart3.
It is forbidden and punishable by law the use of the equipment for different purposes.
OVERVIEW
The Hi Hat Interface is a kit based on
•
Manfrotto® 529B Hi Hat
•
Manfrotto® 100 mm to 75 mm adapter
•
SmartSystem 3/8” to Hi Hat Interface Plate
SETUP PROCEDURE
The Setup procedure is extremely simple.
1.
Before fastening the Hi Hat Interface on the 3/8” male screw of the SmartSystem fluid head
adapter located on SmartSLIDER PRO/mini or Smart 3, make sure to unscrew the three
knobs of the Interface plate so that the plastic dampers will be completely retracted.
2.
Twist on the Hi Hat Interface to the 3/8” male screw until it stops. Don’t overtighten it.
3.
Now you can use the three knobs previously unscrewed to stabilize the Hi Hat Interface in its
new position.
2
MAXIMUM LOAD CAPACITY
Manfrotto® 529B Hi Hat has a maximum Load Capacity of 20kg (Reference: Manfrotto Website
http://www.manfrotto.com/529b-hi-hat).
WARNING: DO NOT OVERLOAD THE STRUCTURE.
For any doubts or questions, don't hesitate to contact our technical office.
3
