Solar pump connector
PANEL ADJUSTMENT
SUMMER
0-30
º
ANGLE
SPRING / AUTUMN
30-60
º
ANGLE
ENGLISH
Contents
1. Introduction
2. Before you start
3. Overview
4. Components
5. Assembling and using your product
6. Cleaning and maintenance
7. Trouble shooting
8. Spare parts
9. Full 2 year warranty
Introduction
Thank you for purchasing a Sunjet 150. These instructions contain
important information for using this product. Please keep them in a
safe place for future reference.
Before you start
The Sunjet 150 can be used in a small pond or water reservoir
provided the solar panel receives direct sunlight. A solar panel powers
the pump by converting sunlight into electricity.
The solar panel will power the pump when exposed to direct sunlight.
If the sun passes behind a cloud then the amount of electricity
produced by the panel will decrease and the pump will stop working
or slow down. As soon as the sun reappears from behind the cloud
the amount of electricity will increase instantly and the pump will begin
to work again.
The amount of electricity produced by the solar panel is proportional
to the strength of sunlight received. For optimum performance we
recommend that your solar panel should be exposed to as much
direct sunlight as possible and away from shady areas e.g. under
trees. The panel can also be angled towards the sun to maximise the
amount of light received.
Overview
The Sunjet 150 has been designed for outdoor use. The pump drives
water up through the fountain head and sprinkles down into the
container / main bowl. The water is constantly re-cycled.
Components
1 Solar panel
2 Pump
3 Base with filter
4 2 x extension tubes with fountain head set
5 Solar panel mounting kit
Assembling and Using Your Product
Unpack all components carefully.
Please ensure that you check all parts have been removed from
the packaging especially the solar panel, which is stored in the
bottom of the box.
Decide on a suitable location, bearing in mind there will be some
water splashes when the product is in use.
First unroll the pump cable.
Place the pump into a container/ bowl.
Choose your favourite fountain head and attach it to the pump.
Fill the main bowl with water.
Sunjet 150
,QVWUXFWLRQ0DQXDO
Insert pump into base
Fountain head set
Remove pump cover
Take out impeller to clean
Impeller Pump cover
