Smart Scoop SmartStart Fresher Litter Box, Руководство пользователя

Страница: 17 / 20

4 www.
smartscoop.com
17 www.
smartscoop.com
Introduction to SmartScoop
®
Thank you for purchasing the SmartScoop Self-Scooping Litter Box!
SmartScoop was created to meet the challenge of litter box odor and
mess. We knew there was a need for a more effective automatic litter
box, so we designed an innovative solution to make your life easier.
Now you can spend more time with your cat and less time with the box!
This guide will help you set up the SmartScoop Self-Scooping Litter Box,
help your cat adjust to using the box, and provide care and cleaning
tips to keep it working smoothly and efficiently.
If at anytime you need detailed information on setup, such as pictures,
instructions and videos, please visit www.smartscoop.com. You can also
give us feedback or suggestions by emailing comments@smartscoop.com.
Enjoy your Fresher Litter Box!
Dr. Steve Tsengas
President and CEO
SmartScoop, an OurPet’s brand
How It Works
The SmartScoop Self-Scooping Litter Box features a sensor that detects
when your cat is in the box. Once the cat leaves the box, it begins a
15-minute countdown. After the countdown, SmartScoop begins a
cleaning cycle and scoops the box clean of waste and clumps.
Clumps and waste are deposited in the waste bin and the motor unit
returns to the “ready” position at the back of the box.
Troubleshooting
Issue Resolution
Mode light is blinking red or Unit has encountered excessive resistance.
solid red Power off unit. Unlock clutch. Remove
obstruction. Move unit back to ready
position. Power unit back on.
Unit will not operate Make sure motor unit cord is connected
to power cord, and power cord is
plugged in to a functioning outlet.
Clutch may not be engaged.
Move motor / waste unit to the “ready”
position and engage clutch.
Be sure that the unit is powered on.
The MODE light will be solid green to
indicate it is in automatic mode.
Cleaning cycle doesn’t start Dirty sensor.
Clean sensor lens with a soft, dry cloth.
Waste unit and/or motor unit Make sure the motor unit and waste unit
binds and gets stuck are fully engaged. You should hear a
“CLICK” when assembling if they are
assembled properly
Close the rake safety door.
Unit struggles through a Litter level may be too high.
cleaning cycle
Litter may be built up near the edge of
the pan. Even out litter in the pan.
Waste is stuck behind rake Stop unit, lift rake and clear obstruction.
Waste lid isn’t closing The waste unit may be full.
Remove waste.
I can’t remove waste unit. Litter may have fallen into latch area
It seems to be stuck. preventing latch from operating properly.
Vacuum litter from latch area.
More help can be found by visiting www.smartscoop.com or by calling
1-877-SCOOP44 (1-877-726-6744).