SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2016
61
1. In the left navigation bar, click
Advanced Setup
>
NAT
>
Port Triggering
and then click
Add
. The following page appears.
2. Customize the fields as needed for the firewall pinholes you wish to establish. A maximum 96 entries can be configured.
3. Click
Apply/Save
to commit your changes. If the selected service configures multiple servers, the same number of entries
are added to the table of the NAT - Virtual Servers Setup page.
The fields on this page are explained in the following table.
Field Name
Description
Use Interface
Select the interface for which the port triggering rule will apply.
Select a Service
Select the application which requires a port trigger entry. The starting and ending IP
addresses and port numbers that are configured for the service are populated into the
table at the bottom of the page.
Custom Service
If the application you want does not appear in the selection list, enter a unique name for
the application for which you are creating a port trigger entry. This is a free-form text field.
Trigger Port Start
Enter the starting number of the range of available outgoing trigger ports. Options are:
1
-
65535
.
