background image

a

b

LED Indicators

Insert Battery

Quick Start User Guide

• 

Before using your Smart PowerCharger™, 
be sure to read this guide along with safety 
precautions.

• 

Familiarize yourself  with how to use the charger 
properly.

• 

For future reference, keep this guide handy.

SPC4000

4. The charger’s LED’s indicators on 
top of  the unit will cycle from RED 
to  Green. Once the LED’s are static 
Green, the unit is in CHARGE MODE.

1. Unpack the 
charger and place 
in a DRY area for 
operation.

2. Connect the POWER 

CORD to the side of  
the charger labeled AC 

Power Connection 
(AC 100V – 240V).

3. Turn “ON” 
the Power 
Switch.

In your box:
a. SPC4000
b. Power Cord

*Note: For extended life of  your batteries, it is recommended 
that you DEEP CYCLE your batteries following 5 to 10 flight 
cycles. DEEP CYCLE your batteries when it is 30% capacity or 
below. The best time to DEEP CYCLE your batteries is overnight.  

1. Insert the battery into the charging slot.  The  
SPC4000 will communicate with the battery and 
send the battery into CHARGE MODE automatically.

3. Remove the battery and turn 

OFF the SPC4000.

1. Insert the battery 
into the charging slot. 
The SPC4000 will 
communicate with the 
battery and send the 
battery into CHARGE 

MODE automatically. 
The battery’s green LED 
will be blinking until 
fully charged.

2. When the battery’s green LED’s 
are OFF, it is fully charged.

QUICK START USER GUIDE

CHARGING YOUR BATTERIES

DEEP CYCLE DISCHARGING

Отзывы: