-11-
Important Information for
the User
Once the Smart Lifter ECO opener has been installed,
the user must be informed about how it works and all the
risks that can arise if it is used improperly. The user must
avoid placing himself/herself in dangerous situations such
as standing within the door’s operating range when it is
moving.
Do not
let children play near the door and keep the
remote controls out of their reach.
All servicing, repairs or checks must be carried out
by professionally qualified personnel and noted on a
maintenance register kept by the user.
Information for the user is found in the USERS/OWNERS
MANUAL included with this opener.
IMPORTANT:
Please make sure the USERS/OWNERS
MANUAL is passed on to the owner prior to leaving the
installation.
IMPORTANT:
In the case of a malfunction the user must
call an authorized Smart Opener Pty Ltd installer and
should not attempt to repair the opener.
Maintenance
No particular maintenance is required for the logic circuit
board.
At least twice a year check that the door is properly
balanced and that all working parts are in good working
condition.
IMPORTANT:
A poorly operating door can effect the life of
the automatic opener due to incorrect loads and will void
the warranty.
Check the reversing sensitivity at least twice a year and
adjust if necessary.
Make sure that the safety devices are working effectively
(photo beams, etc.)
Final Notes
This manual is only for use by technical personnel
qualified to carry out the installation.
No information given in this manual can be considered of
any interest to the end user.
No setting or adjustments contained in this manual can
be carried out by the end user.
It is important for the installer to show their clients correct
operational use of the Smart Lifter ECO including the use
of the manual disengagement cord.
Inform the owner about the need for regular and accurate
maintenance, especially regarding a regular check of the
safety and reversing devices.
Technical Specifications
Power Input:
240 VAC ±10% 50Hz
Motor:
24V DC 100W
Courtesy light time:
3 minutes approx.
Working temperature: -20° ~ 70°C
Relative Humidity:
<90%
Open and close force: 250N
Reception frequency: 433.22MHz
Storage Capacity:
20 Transmitters
Decoding:
Rolling code
Transmitter power:
27A 12V Battery
Courtesy Light:
LED Array
NOTE: Smart Openers Pty Ltd reserves the right to
modify its product and product specifications at any
time without prior notice.
© September 2011 Smart Openers Pty Ltd
