9
8
List
1. Cellular Blood Pressure
Monitor (SMBP802-GS-001)
3. User manual
4. 4*AA batteries
2. Cuff (22~42 cm or 22~45 cm)
(Type BF applied part)
The Choice of Power Supply
1
.Battery powered mode:
6VDC 4*AA batteries
2
.AC adapter powered mode:
6V 1A (not included)
(Please use the AC adapter which
authorized by the manufacturer!)
Installing and Replacing the Batteries
BEFORE YOU START
INTRODUCTION
In order to get the best effect and protect your monitor, please use the right
batteries and special power adapter which complies with local safety standard.
Component list of
pressure measuring system:
1 Cuff
2 Air pipe
3 PCBA
4 Pump
5 Valve
Replace the batteries whenever the below happens
The shows
The display dims
The display does not light up
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
AC adapter
BATTERY COMPARTMENT
BATTERY DOOR
CUFF TUBE
CUFF
START/STOP BUTTON
DC POWER SOCKET
CUFF TUBE CONNECTOR
CAUTION
CAUTION
Components of the Device
If this is your first time using the device:
1.Slide open the battery door on the back of the device.
2.Install the batteries provided with the device. Follow
the diagram inside the battery compartment for correct
polarity—the springs should align with the negative
sign on the batteries.
3.Slide the battery door closed.
