5
Figure
5
‐
1
HARDWARE INSTALLATION
1.
Turn off the StretcherPro-HD.
2.
Connect the HDMI source (i.e. PC, Blu-Ray Player, Digital Signage, etc.) to the HDMI
INPUT port of the StretcherPro-HD using HDMI cables.
3.
Connect the (4) monitors to the (4) HDMI OUTPUT ports of the StretcherPro-HD using
HDMI cables for HDMI monitors and TVs, or HDMI-to-DVI adapters for DVI displays.
Connect the upper
left display to port 1, the upper right display to port 2, the lower left display to port 3 and the lower
right display to port 4.
4.
Connect the IR receiver to the IR input jack at the back of the StretcherPro-HD.
5.
Optionally connect an RS-232 cable from the PC to the RS-232 port of the unit for additional
control.
6.
Optionally connect the RJ45 connector to a network for additional control.
7.
Turn on the StretcherPro-HD.
