3
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• Please note that changes or modifications of this product not expressly approved by the
party responsible for compliance could void the user's authority to operate the equipment.
•
Inspect the unit prior to use. Check power cord to ensure there is no damage to insulation.
If the unit shows any signs of being dropped or damaged, do not plug in and contact the
manufacturer.
• Always disconnect the power cord from electrical outlet before performing any maintenance
or replacing the filter.
• Never operate the unit without the filter installed.
• Designed for indoor use only. Do not attempt to use outdoors.
• Do not use the unit near water, on wet surfaces or in high humidity environment. It should
not be placed in/near a bathroom, shower, sauna, or swimming pool
• Do not use the unit near heated surfaces. Keep power cord away from heated surfaces.
• Place on flat stable surface. Keep unit upright at all times. Do not attempt to use if the unit is
not in upright position.
• Never touch any part of the appliance or plug/unplug the power cord with wet hands.
• Never carry the unit by the power cord. Pick the unit up and carry by the base to move it.
• Plug the power cord directly into electrical outlet. Do not use extension cord as a power
overload may cause over heating and risk of fire.
• Do not place the power cord under other appliances.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play with the appliance
• To avoid overheating, do not cover the appliance.
• If the power cord is damaged, it must be replaced or repaired by the manufacturer. Do not
attempt to replace or repair the power cord.
• To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum
distance of 3 feet from the air outlet.
• Keep the appliance away from flammable liquids and vapors.
• If there is a loose fit between the power cord plug and the electrical outlet or the plug
becomes very hot, the electrical outlet may need to be replaced. Check with a qualified
electrician to replace the electrical outlet.
• This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician.
Do not attempt to circumvent this safety feature.
• To reduce the risk of fire or electric shock, do not use this fan with any solid-state speed
control device (e.g. outlet with dimmer switch).
WARNING !!!