WIFI APP Download And Sign Up And Pair Thermostat
Preparation required for Wifi Connection:
A 4G mobile phone and wireless router, reconnect the wireless router on the mobile phone WLAN
interface, and record the WIFI password [need to be used when the thermostat is paired with the Wifi.
Note:
Wifi from router must be 2.4G, 4G wifi from the other mobile phone hotspot is also ok, 5G router
wifi is not ok.
Step 1 Download your APP
Scan following QR cod and download APP through browser(Android also can search “ Smart life” at
Google Play, IPhone also can search “Smart life” at App Store
Step 2 Register your account
After install APP,click “register”
（
Fig 2-1
）
Please read the Privacy Policy and press Agree to proceed to the next step. (Fig 2-2)
Registration account name uses your available Email Or mobile phone number, and please select
Region, then click “Continue”(Fig 2-3)
You will receive a 6-digit verification code from your email or SMS and enter your phone (Fig 2-4)
Please set the account password, Password must contain 6-20 letters and numbers. click “Done”(Fig
2-5)
Fig 2-1
Fig 2-2
Fig 2-3
Fig 2-4
Fig 2-5
Step 3 Create family information(Fig 3-1)
1. Fill in the family name(Fig 3-2 ).
2. 2. Select or add a room(Fig 3-2).
3. 3. Set location (Fig 3-4)
Fig 3-1
Fig 3-2
Fig3-3
Fig 3-4
Step 4 Connect your Wi-Fi signal (
EZ distribution mode)
In the power-on state,
long press “
” for 3-5seconds, the “OFF” and “
” will flashing in the same time,
short press “
” to indicate the EZ distribution mode, the icon
flashes to indicate the AP
distribution mode, the icon
indicates that the phone has been disconnected with the device.
Press "Add Device" or "+" in the upper right corner to add the device (Fig 4-1) and select the device type
"Thermostat"
（
Fig 4-2
）
On your thermostat, Click Confirm
icon rapidly blink. then select your network and back to your app to
enter the password of your wireless router
（
fig 4-4
）
and confirm.The app will connect automatically
（
Fig
4-5
）
This may typically take up to 5~90 seconds to complete. This is Ez mode which provides fast network
connection between your app and your device.
Your room name could be edited when the device is connected
，
And you can choose the corresponding
room location. For example, bedroom, kitchen, living room, etc
Fig 4-1
fig 4-2
fig 4-3
fig 4-4
