3
WARNING & CAUTION
Ø Please handle the equipment with care. Physical Damage to the system is
not covered under warranty.
Ø Do not power on the system without reading this manual. Ensure proper power supply with
Earthing.
Ø Note down the serial number and model no. of the device for future reference and quote in
all support and service requests.
Ø To connect or interface the Card reader to the
Smart XS NG
unit please refer to the
Hardware Installation Guide or Manual and carefully follow the instructions. A trained
technician must make the connections.
Any negligence on your part may damage the Card reader interface on the
Smart XS NG
terminal.
Ø Mounting the unit in strong sunlight may affect user visibility of the LCD. Ensure that the
LCD and LED’s are clearly visible in all lighting conditions.
Ø The fingerprint sensor glass may periodically require cleaning - use suitable glass cleaner.
Ø Do not uses this unit near water.
Ø Do not opens system or places it near other heavy electrical equipment. The system is
sensitive to Electro Static Discharge (ESD)
Ø Never insert objects of any kind into the unit or through the cabinet slots as they may touch
voltage points and/or short circuit parts possibly resulting in fire or electric shock. Never
spill liquid of any kind on the unit.
Ø when connecting up the Controller Access Controller ensure that the mains power supply is
safely isolated. Power up the controller only when installation is complete.
Ø Operating conditions: 0 to 55 deg Celsius and 50 deg Celsius at 90% RH.
Fire Safety and accountability Notice
When connecting card or Biometric readers to any emergency entry, exit door, barrier or
elevator must provide an alternative exit in accordance with all fire and life safety codes
pertinent to the installation. These fire and safety codes vary from city to city and you must
get approval from local fire officials whenever using an electronic product to control a door or
other barrier.
Important Instructions
Care should be taken identifying the wires. Improper wiring may render permanent
damage to the device or personal injury.
Refer the color code on the Reader to connect the external weigand reader on the
controller.
Check the earthing at the site before installing the controllers. Normally the earthing
should be between 1V to 2V only. Earthing on the higher side may damage the
controller or its various other components.
Before Installation delete all data ( Factory reset ) using keypad menu * 90
Disclaimer
Changing of default user password is mandatory to avoid tampering of the device.
In case of user password not changed; smart I will not be responsible for any
tampering on the device.
