2.2.2 Date Stamp
2.2.3 Motion Detection
By turning this function on, when a moving object is detected and the recorder will begin to
record. If the object stops moving the recorder will stop, and begin again once the same object
moves again.
2.2.4 Loop Recording
This option allows the user to turn on the loop recording function. To adjust the loop recording
times, go to the ‘Loop Time’ section (2.2.5) on page 10.
9
The date stamp option allows you to add the time and date on the screen of the recorded videos.
To adjust the time and date, go to section 2.4.5 on page 15.
