Warnings and Safety Instructions
The main priority at Smart Flex is making sure that all
purchasers of our products enjoy them safely. We ask
that everyone reads this manual carefully and with caution.
Please observe all warnings and safety instructions.
FAILURE
to adhere to any of the warnings or cautions listed in this
manual could potentially void the warranty.
At the end
of this manual, there will be contact information. Please
email or call with questions or comments. Thank you for
purchasing your adjustable bed frame from Smart Flex.
Safety Precautions
Smart Flex strongly encourages that you read the instructions
completely before using this product. It is imperative
that you perform correct assembly and operation of your
adjustable bed to ensure ideal performance and longevity
from your SF-600 adjustable bed frame. We ensure that
this product has been thoroughly tested and inspected
for safety and functionality prior to sale.
Radio Frequency of the Device is 2.4 GHZ.
FCC compliance device complies with part 15 of the FCC
Rules under these two conditions:
1
.
This device does not cause any harmful interference.
2. This device will accept any interference received,
including interference causing undesired effect on the
operation.
Warnings
Medical Warnings
Pacemaker:
Consult your physician if you have a pacemaker
before using our SF-600 Adjustable Bed. The massage
feature of your SF-600 Adjustable Bed creates vibration.
It is possible for your pacemaker to interpret this vibration
as believing the user is moving and/or exercising. Products
that cause vibration have been known to have this effect
on pacemakers. Again, purchasers with Pacemakers
should consult their physicians before using a SF-600 Adjustable
Bed Frame.
Lifting of SF-600 Adjustable Bed
Consult a physician before lifting, moving or assembling your
SF-600 Adjustable Bed if you have ANY physical restrictions
concerning lifting. For example, customers with Neck,
Back, Shoulder, Arm, Hip, Knee, Foot and Ankle conditions
should consult their physicians before lifting this product
due to the product's weight and potential to aggravate
pre existing injuries or conditions.
In addition:
Any lifting of this product should be done by
a minimum of 2 persons. Product should always be in the
flat position before lifting.
Residential (In-Home) Use Only
Smart Flex makes no assertion that its products are designed
for any medical use. The product is not considered to be
a "hospital or medical" bed for commercial or residential
use. Smart Flex, Inc. has not designed this product to
meet hospital or medical standards as defined by the US
government.
In addition, do not attach Oxygen or additional medical
equipment to this product due to the risk of explosion.
Do not use any flammable gases, liquids or materials
near this product. This includes any medical equipment
that is potentially flammable.
Pinch Hazard
Never place Hands, Feet or any body part near the bed
frame itself while it is in motion to prevent all "pinching"
injuries. In addition, never place any body part under this
product while head and feet sections of the SF-600
Adjustable Bed are elevated. Any portion of the SF-600
Adjustable Bed Frame that rests on the inner frame has
the potential to pinch or injure any body parts placed
under or between sections of the bed frame. Also be
cautious of areas where joints and hinges connect the
various parts of this product because those areas could
also cause pinching or injury if any body part is placed
there while Smart Flex Adjustable Bed Frame is in motion.
Electrical Safety
IMPORTANT NOTE:
To ensure maximum safety, this product
should be plugged into an electrical surge protector and
not directly into the outlet. (Surge Protector is not supplied
with this adjustable bed)
Be sure to always unplug this adjustable bed frame from
the electrical outlet (surge protector) before performing
any cleaning or maintenance of the bed frame. Disconnect
any cord or cable safely by first removing the plug from
the outlet (surge protector). Keep its cords away from
heated and or moist surfaces. Stop using this adjustable
bed and contact the manufacturer for repair if: (1) its
cord or plug is damaged, (2) it is not functioning properly,
or (3) it has been damaged by dropping or any mishandling.
The use of adapters or any modifications is not recommended
unless the outlet is checked by a qualified electrician to
ensure proper grounding of the adapter or plug outlet.
NEVER REMOVE THE GROUNDING PIN OR ALTER THE PLUG
or input IN ANY WAY. Unauthorized modifications could
void the electrical component portion of your warranty.
For power safety, the massage motors will automatically
shut off when running continuously for 10 minutes. Please
press a massage button on the remote to re-engage the
massage feature.
MOTOR SHORT-CiRCUIT:
The input transformer voltage is
AC100-240V, 50/60Hz, 1.5A, the output voltage is DC 29V
2.0A, and the power rate is 50W. In case of a
short-circuit, a fuse on the transformer will burn out to
protect your motors. Please seek professional assistance
to replace the fuse.
Weight Ratings and Restrictions
Overload of Weight:
In the case that an overload of weight is
placed on the foot or head mechanism, the control unit will
get overheated and shut down. Immediately remove the
excess weight, and all functions will resume after the
temperature decreases. The maximum recommended weight
limit on this adjustable bed is 1000 lbs. The lift capacity of 1000
lbs is tested with the weight evenly distributed over enitre
surface of bed base.
Lifting and Lowering Cycles:
Do not sit on the head or the
foot of the bed while changing positions during the lifting or
lowering cycles, and when in the raised position.
Children and Pets:
It is imperative that no children or pets
play on or around The SF-600 Adjustable Bed to prevent any
injury. Do not allow small children to operate the adjustable
bed under any circumstances. Any individual with diminished
mental capacity should also not be allowed to operate this
product for safety reasons.
ADDITIONAL WARNINGS:
• If the SF-600 Adjustable Bed Frame needs to be moved
after assembly, be sure to move while product is in the flat
position with at least 2 people supporting the weight of the
product on both ends. Do not move this product in a vertical
or upright position to prevent injury on the individuals or the
product.
• Unplug this product from the electrical outlet (surge protector)
before attaching or removing any wires connected to the
control box or any other additional accessories.
• Do not insert any items into the control box input or USB
input that is not intended for use with this product or that
does not fit in any input.
• Do not use this product in the vicinity of aerosol spray
products or oxygen products /equipment.
• If there is any visible damage to the electrical cords or
control box, or any electrical component is discovered,
cease all operations of this product.
• Keep electrical power cord away from all heat sources.
Furthermore, if an electrical power cord is visibly damaged
or has been dropped in water or liquid, DO NOT USE.
• Do not expose any part of the SF-600 Adjustable Bed Frame
to moisture. A risk of fire or electric shock greatly increases
when any part of this product is exposed to moisture.
Unpacking the Parts Included
1. Open the carton box and unfold the metal bed frame.
2. Then open all the boxes containing all the parts and only
cut zip ties for remote, power cord and mattress bar.
Do Not
cut the zip ties that tighten the USB Y cable, and underbed
LED light cable.
3. Please make sure you have all the parts of your adjustable bed
.
- 4 pcs corner legs
- 4 pcs Motor pins, 4 pcs Motor clips
- 4 Mattress Corner Guards
- Control Box
- Power Cord
- Power Supply Adapter
- Underbed LED Light
- Remote Control
- Foot Massage Motor
- Head Massage Motor
- Head Motor
- Foot Motor
- Lumbar Motor
- Head Tilt Motor
- USB Y Cable
- Massage Y Cable
- 2 Pairs of (2) USB Ports
- 2 AAA Batteries
- 2 9V Batteries(not included)
- Sync Cable (included with TXL Base)
- Instruction Manual
Assembly of the Corner Legs to the Base
1. First, open up your SF-600 Box.
2. Unfold and lay down the bed base.
3. As you unfold the bed frame, the two center legs will
fold out. Please lay the frame flat with legs up
4. Then tighten the 4 corner legs
5. Use the adjustable leg heights that you prefer.
Bluetooth Connectivity
To use Bluetooth feature on your base please download the
OKIN ComfortBed II
app from the Appstore if using an Apple
product and Play Store for Android.
Pairing the Remote Control to the Control Box
As the pairing procedure is already done by the manufacturer,
you can just insert 2 AAA batteries into your wireless remote
control and start to enjoy your SF-600 Adjustable Bed. If your
remote control fails to operate, please refer to
troubleshooting #8.
Wireless Remote Control Operation
1. Press 1 once to preset Zero G position (Head Approx. 20
degrees, Foot Approx.40 degrees)
2. Pair Button to pair your remote and bed in case they become
unpaired (see troubleshooting#8)
3. Press 3 once to preset S/F position (Head Approx. 10 degrees,
Foot Approx. 0 degrees)
4. Press 4 once to preset TV position (Head Approx. 65 degrees,
Foot Approx. 15 degrees)
5. Memory Button is used to set your desired position. Adjust your
bed to the desired positions, then press and hold the Memory
button for 5 seconds until the Timer LEDs flash. Your Memory
button is now set. Press once to use your memorized position.
6. Press 6 once to preset Lounge position
7. Press and Hold on 7 to raise the lumbar of the bed.
8. Lock Button. Press and hold lock button for 5 seconds. The lock
button red light will begin flashing, and then stop. Remote is now
in lock mode.
9. Press and Hold on 9 to lower the lumbar of the bed.
10. Press and Hold on 10 to raise the head of the bed.
11. Press and Hold on 11 to raise the head tilt of the bed.
12. Press and Hold on 12 to raise the Foot of the bed.
13. Press 13 once to preset Flat Position. (Head and Foot 0 degrees)
14. Press and Hold on 14 to lower the head of the bed.
15. Press and Hold on 15 to lower the head tilt of the bed.
16. Press and Hold on 16 to lower the foot of the bed.
17. Press to cycle through massage intensity of head massage
18. Press to set your massage timer. When Timer Button is
pressed, the (10min/20min/30min) bar will light up. Green light
represents timer setting for massage duration time. The
default time is 10 minutes.
19. Press to cycle through massage intensity of foot massage
20. Press to turn on/off all Massage Functions
21. Press for Flashlight function at the top of the remote.
22. Press to cycle through different massage pattern types.
How to Sync Two Twin XL Bases into a King
1. Use only one remote provided. Pairing for the remote
A and Base A is already done by the manufacturer;
otherwise refer to Troubleshooting #8.
2. Connect the two control boxes with the Sync cable
as shown below.
3. Bases A and B should now be synced and paired with
the respective remote.
Troubleshooting
1. When there is no power, check to make sure all cords are
connected properly and the plug is inserted securely into the
power outlet. Test to ensure that the outlet has power.
2. When the LED power indicator light on the remote control
is off, replace 2 AAA batteries.
3. When the LED power indicator light on the transformer is
not on, replace the transformer.
4. When the LED power indicator lights are on but there is no
power, replace the motor.
5. When the massage does not work, ensure that all the cords
are inserted properly and if that still doesn’t work, replace the
massage unit by removing the massage sponge pad, replace
a new one, cover the sponge pad and insert the cord back
to the control box.Then, press the massage button to see if it
works now.
6. In case of no power supply, purchase two 9 volts batteries
and install them in the AC/DC power adapter as a battery
backup. This will allow the base to adjust back to the FLAT
position if the power goes out. Press the “FLAT” button to get
the bed flat after installing the two 9 volts batteries.
7. When there is power supply but the Head or Foot of the bed
is not functioning, replace the motor
8. If your remote control does not work then you must pair it
with the control box yourself. First, insert 2 AAA batteries
(included) into your wireless remote control. Pair your Wireless
Remote Control with the Control Box by pressing the Pairing
Button on the Control Box twice quickly (The blue pairing light
will turn on). Then, press and hold the pair button on the
remote control for 5 seconds. The remote LED will start
flashing. The Blue pairing light on the control box will turn
Green to indicate pairing is complete. Otherwise, repeat the
above steps.
Warranty Information
Warranty Warning:
Any opening or tampering with the control
box, motors, remote or hand controls will void the warranty. Do
not alter component wiring or modify the structure of the product
in any way or the warranty will be voided. Only allow those
AUTHORIZED to conduct repairs and/or part replacements on
your adjustable bed to secure the product warranty.
Intended use
Smart Flex Adjustable Bed Frames are intended for In-Home
Residential use. Any changes, alterations, modifications or
unauthorized attachments to any part of this product will void
the warranty. Exceeding the recommended weight limits for
this product will also void the warranty.
Warranty Claims:
If a potential issue with your product arises and you wish to
make a claim, you must contact Smart Flex customer service
at 1-888- 444-9888 within 20 days of discovery of the issue.
Please keep the original sales receipt that was received from
the retailer at the date of purchase along with the model
number for any warranty claim.
1. Warranties are non- transferable and only given to the original
retail purchaser of the Smart Flex, Inc. Adjustable bed.
2. Your Smart Flex, Inc. Adjustable bed is warranted against any
defects of (1)All parts and full labor of the Smart Flex Adjustable
Bed for a period of 3 (Three) years including (ServeCo North
America, LLC. After Sales In-Home Service); (2) The metal frame
for a period of 20 years from the warranty commencement
date (purchasing date). Smart Flex, Inc. will send replacement
parts for any defective part to the purchaser at no cost upon
notice during the first year from the warranty commencement
date. If the purchaser does not return the defective part to
Smart Flex, Inc. within 20 days of receiving the replacement
part, the prescribed warranty shall not apply and purchaser
shall bear all service, labor, transportation and shipping costs
related to the delivery and replacement of the defective
part.
3. Warranty shall not apply if (1) the damage is caused by the
purchaser, (2) there has been any repair or replacement done
by an unauthorized person, (3) the adjustable base has been
mishandled through physical or electrical abuse or misuse, or
operated in an improper manner that is inconsistent with the
instructions outlined in the SF30, SF50, SF200, SF300, SF500,
SF600, or SF800 Instruction Manuals, (4) there is damage done
to the mattress, fabric, cables, or electricals, or (5) there is any
costs for unnecessary service calls.
Please note:
The decision to repair or replace components
shall be made by Smart Flex , Inc. The repair or replacement
of any part of this product should be for the sole purpose of
the purchaser. Smart Flex, Inc. shall bear no liability for any
special, indirect or incidental damages arising from a
warranty claim or repair; or on any damage, claim or loss not
covered by the terms of the Smart Flex, Inc. Adjustable Bed
warranty.
Contact Information:
Smart Flex, Inc.
623 Southwest Street,
High Point, NC 27260
1-888- 444-9888
13
Содержание SF-600
Страница 1: ...SF 600...
Страница 13: ...12...
