Warnings and Safety Instructions
The main priority at Smart Flex is making sure that all purchasers
of our products enjoy them safely. We ask that everyone reads
this manual carefully and with caution. Please observe all
warnings and safety instructions. FAILURE to adhere to any of
the warnings or cautions listed in this manual could potentially
void the warranty. At the end of this manual, there will be
contact information. Please email or call with questions or
comments. Thank you for purchasing your adjustable bed
frame from Smart Flex.
Safety Precautions
Smart Flex strongly encourages that you read the instructions
completely before using this product. It is imperative that you
perform correct assembly and operation of your adjustable
bed to ensure ideal performance and longevity from your
SF-30 adjustable bed frame. We ensure that this product has
been thoroughly tested and inspected for safety and
functionality prior to sale.
Warnings
Lifting of SF-30 Adjustable Bed
Consult a physician before lifting, moving or assembling your
SF-30 Adjustable Bed if you have ANY physical restrictions con-
cerning lifting. For example, customers with Neck, Back, Shoul-
der, Arm, Hip, Knee, Foot and Ankle conditions should consult
their physicians before lifting this product due to the product's
weight and potential to aggravate pre-existing injuries or condi-
tions.
In addition:
Any lifting of this product should be done by a
minimum of 2 persons. Product should always be in the flat
position before lifting.
Residential (In-Home) Use Only
Smart Flex makes no assertion that its products are designed
for any medical use. The product is not considered to be a
"hospital or medical" bed for commercial or residential use.
Smart Flex, Inc. has not designed this product to meet hospital
or medical standards as defined by the US government.
Risk of Explosion
Do not attach Oxygen or additional medical equipment to
this product due to the risk of explosion.
Do not use any flammable gases, liquids or materials near this
product. This includes any medical equipment that is potentially
flammable.
Pinch Hazard
Never place Hands, Feet or any body part near the bed frame itself
while it is in motion to prevent all "pinching" injuries. In addition,
never place any body part under this product while head
sections of the SF-30 Adjustable Bed are elevated. Any portion
of the SF-30 Adjustable Bed Frame that rests on the inner
frame has the potential to pinch or injure any body part
placed under or between sections of the bed frame. Also be
cautious of areas where joints and hinges connect the various
parts of this product because those areas could also cause
pinching or injury if any body part is placed there while Smart
Flex Adjustable Bed Frame is in motion.
Electrical Safety
IMPORTANT NOTE:
To ensure maximum safety, this product
should be plugged into an electrical surge protector and not
directly into the outlet. (Surge Protector is not supplied with
this adjustable bed)
Be sure to always unplug this adjustable bed frame from the
electrical outlet (surge protector) before performing any
cleaning or maintenance of the bed frame. Disconnect any
cord or cable safely by first removing the plug from the outlet
(surge protector). Keep its cords away from heated and or
moist surfaces. Stop using this adjustable bed and contact the
manufacturer for repair if: (1) its cord or plug is damaged, (2)
it is not functioning properly, or (3) it has been damaged by
dropping or any mishandling. The use of adapters or any
modifications is not recommended unless the outlet is
checked by a qualified electrician to ensure proper grounding of
the adapter or plug outlet. NEVER REMOVE THE GROUNDING
PIN OR ALTER THE PLUG or input IN ANY WAY. Unauthorized
modifications could void the electrical component portion of
your warranty.
MOTOR SHORT-CIRCUIT:
The input transformer voltage is
AC100-240V, 50/60Hz, 1.5A, the output voltage is DC 29V 1.8A,
and the power rate is 50W. In case of a short-circuit, a fuse on
the transformer will burn out to protect your motors. Please
seek professional assistance to replace the fuse.
Weight Ratings and Restrictions
Overload of Weight:
In the case that an overload of weight is
placed on the head mechanism, the control unit will get
overheated and shut down. The control unit will resume all
functions after the excess weight is removed from the bed
and its temperature has decreased. The maximum
recommended weight limit on this adjustable bed is 1000 lbs.
The lift capacity of 1000 lbs is tested with weight evenly
distributed over entire surface of bed base.
Lifting and Lowering Cycles:
Do not sit on the head of the bed
while changing positions during the lifting or lowering cycles,
and when in the raised position.
Children and Pets:
It is imperative that no children or pets play
on or around The SF-30 Adjustable Bed to prevent any injury.
Do not allow small children to operate the adjustable bed
under any circumstances. Any individual with diminished
mental capacity should also not be allowed to operate this
product for safety reasons.
ADDITIONAL WARNINGS:
• If the SF-30 Adjustable Bed Frame is needed to be moved after
assembly, be sure to move while product is in the flat position with
at least 2 people supporting the weight of the product on both
ends. Do not move this product in a vertical or upright position to
prevent injury on the individuals or the product.
• Unplug this product from the electrical outlet (surge protector)
before attaching or removing any wires connected to the con-
trol box or any other additional accessories.
• Do not insert any items into the control box input or any port/
input that is not intended for use with this product, or that
does not fit in any port/ input.
• Do not use this product in the vicinity of aerosol spray products
or oxygen products /equipments.
• If there is any visible damage to the electrical cords or control
box, or any electrical component is discovered, cease all
operations of this product.
• Keep electrical power cord away from all heat sources.
Furthermore, if an electrical power cord is visibly damaged or
has been dropped in water or liquid, DO NOT USE.
• Do not expose any part of the SF-30 Adjustable Bed Frame
to moisture. A risk of fire or electric shock greatly increases
when any part of this product is exposed to moisture.
Unpacking the Parts Included
1. Open the carton box and unfold the metal bed frame.
2. Then open all the boxes containing all the parts and cut zip
ties for wired remote, power cord and mattress bar.
3. Please check to make sure you have all the parts of your
adjustable bed
- 4 pcs corner legs
- 4 pcs Motor pins, 4 pcs Motor clips.
- 2 Foot mattress corner guards
- Power Cord (connected to the Head Motor)
- Control Circuit Board (built inside the Head Motor)
- Power Supply Adapter
- Wired Remote Control (connected to the Head Motor)
- Head Motor (all parts connected to this)
- One Sync Y Cable for Syncing 2 TXL bed as a king size bed
(Optional Sold Separately)
- Two 9V Battery as backup power (not included)
- Instruction Manual
Assembly of the Corner Legs to the Base
1. First, open up your SF-30 Box.
2. Unfold and lay down the bed base.
3. As you unfold the bed frame, the two center legs will
fold out. Please lay the frame flat with legs up
4. Then tighten the 4 corner legs
5. Use the adjustable leg heights that you prefer.
SF-30 All Built-in Control System
1. The Power Supply/ Transformer is built-in to the Head Motor.
2. A Control Circuit Board is inside the Head Motor as the
center of control.
3. As connected to the Head Motor, the top cord is connected
to the wired remote control and the bottom cord is
connected to the Power Supply.
4. You should have your Motor system already built in and
connected as shown in figure 4.
Wired Remote Control Operation
First, plug in the power supply adapter into the power outlet
(surge protector) and then you can start to enjoy your SF-30
Adjustable Bed. As backup power, insert two 9V batteries (not
included with this product) into your Power Adapter to
operate your SF-30 in case of no power supply.
How to Sync Two Twin XL Bases into a King
(Optional Sold Separately)
1. Connect the “V” end parts of the Sync Y cable, one to the
port of the Head Motor of Bed A and the other to the port of the
Head Motor of bed B.
2. Then connect the third end of the Sync Y cable to the
Wired Remote Control, and syncing of 2 TXL beds into a King size
bed is now completed.
Troubleshooting
1. When there is no power, check to make sure all cords are
connected properly and the plug is inserted securely into the
power outlet (surge protector). Test to ensure that the outlet
has power.
2. When the wired remote control is not operating, check to
ensure that there is power supply coming from the outlet
(surge protector). If not, use or replace two 9 volts batteries in
the Power Adapter.
3. When the transformer/ power supply is not functioning, replace
the Head Motor since it is built-in the Head Motor.
4. When there is power supply but the Head of the bed is not
functioning, replace the motor.
5. In case of no power supply, purchase two 9 volts batteries
and install it in the Power Adapter as battery backup. This will
allow the base to adjust back to the FLAT position if the power
goes out.
Warranty Information
Warranty Warning:
Any opening or tampering with the control
box, motors, remote or hand controls will void the warranty. Do
not alter component wiring or modify the structure of the product
in any way or the warranty will be voided. Only allow those
AUTHORIZED to conduct repairs and/or part replacements on
your adjustable bed to secure the product warranty.
Intended use
Smart Flex Adjustable Bed Frames are intended for In-Home
Residential use. Any changes, alterations, modifications or un-
authorized attachments to any part of this product will void
the warranty. Exceeding the recommended weight limits for
this product will also void the warranty.
Warranty Claims:
If a potential issue with your product arises and you wish to
make a claim, you must contact Smart Flex customer service
at 1-888- 444-9888 within 20 days of discovery of the issue.
Please keep the original sales receipt that was received from
the retailer at the date of purchase along with the model
number for any warranty claim.
1. Warranties are non- transferable and only given to the original
retail purchaser of the Smart Flex, Inc. Adjustable bed.
2. Your Smart Flex, Inc. Adjustable bed is warranted against any
defects of (1)All parts and full labor of the Smart Flex Adjustable
Bed for a period of 3 (Three) years including (ServeCo North
America, LLC. After Sales In-Home Service); (2) The metal frame
for a Limited Life Time Warranty. Smart Flex, Inc. will send re-
placement parts for any defective part to the purchaser at no
cost upon notice during the first year from the warranty com-
mencement date. If the purchaser does not return the defec-
tive part to Smart Flex, Inc. within 20 days of receiving the re-
placement part, the prescribed warranty shall not apply and
purchaser shall bear all service, labor, transportation and ship-
ping costs related to the delivery and replacement of the de-
fective part.
3. Warranty shall not apply if (1) the damage is caused by the
purchaser, (2) there has been any repair or replacement done
by an unauthorized person, (3) the adjustable base has been
mishandled through physical or electrical abuse or misuse, or
operated in an improper manner that is inconsistent with the
instructions outlined in the SF30, SF50, SF100, SF200, SF300,
SF500, SF600, or SF800 Instruction Manuals, (4) there is damage
done to the mattress, fabric, cables, or electricals, or (5) there
is any costs for unnecessary service calls.
Please note:
The decision to repair or replace components
shall be made by Smart Flex , Inc. The repair or replacement
of any part of this product should be for the sole purpose of
the purchaser. Smart Flex, Inc. shall bear no liability for any
special, indirect or incidental damages arising from a warran-
ty claim or repair; or on any damage, claim or loss not cov-
ered by the terms of the Smart Flex, Inc. Adjustable Bed war-
ranty.
Contact Information:
Smart Flex, Inc.
623 Southwest Street,
High Point, NC 27260
1-888- 444-9888
5
