SMART Embedded Computing ATCA-F140 Series, Инструкция по установке и эксплуатации

Страница: 11 / 138

ATCA-F140 Series Installation and Use (6806800M67S) 11
About this Manual
Overview of Contents
This manual is divided into the following chapters and appendices.
Safety Notes on page 19 summarizes the safety instructions in the manual.
Notice de Sécurité on page 27 provides a French translation of the Safety Notes section.
Sicherheitshinweise on page 35 provides a German translation of the Safety Notes section.
Chapter 1, Introduction on page 43 gives an overview of the features of the product,
standard compliances, mechanical data, and ordering information.
Chapter 2, Hardware Preparation and Installation on page 47 outlines the installation
requirements, hardware accessories, and installation procedures.
Chapter 3, Controls, LEDs, and Connectors on page 67 describes external interfaces of the
blade. This include connectors, LEDs, and mechanical switches.
Chapter 4, Functional Description on page 91 includes a block diagram and functional
description of major components of the blade.
Chapter 5, U-Boot on page 113 describes the boot firmware.
Appendix A, ATCA-F140-TCLK3 Information on page 125 contains information specific to
the ATCA-F140-TCLK3 blade.
Appendix B, ATCA-F140-D Information on page 131 contains information specific to the
ATCA-F140-D blade.
Appendix C, Related Documentation on page 135 provides a listing of related product
documentation, manufacturer’s documents, and industry standard specifications.