manualshive.com logo in svg

Smart Electrician 3705414, Руководство пользователя, Страница: 6 / 6

Поделиться
Скачать
Smart Electrician 3705414 Скачать руководство пользователя страница 6

Page 

9

Page 

10

CARE AND MAINTENANCE

Your portable halogen work light requires very little care and 

maintenance. Simply clean the lens, lamp head and lamp stand 

regularly with a non-abrasive cleaner.

WARNING

: Always make sure that work light is unplugged and 

cooled down before attempting to clean it.

Storage

Always allow the work light to cool down completely before 

storing.  Store in a safe place, out of the reach of children.

TROUBLE SHOOTING

Use below chart for troubleshooting your worklight.

SAVE THESE INSTRUCTIONS! 

SAVE THESE INSTRUCTIONS! 

PROBLEM POSSIBLE CAUSE

CORRECTIVE ACTION

If the work 

light will not 

operate

There may be a poor 

connection between 

lamp holder and 

bulb.

Bulb needs 

replacement.

Try re-installing the bulb. Refer to Halogen Bulb 

Installation section of this manual.

Remove bulb and check for a break in the 

filament wire. 

Replace bulb if necessary. Refer 

to Halogen Bulb Installation section of this 

manual.

The work 

light comes 

on, but the 

lights are 

dimmed

Improper voltage or 

power supply.  The 

work light will only 

operate on standard 

household 120V AC/ 

60 Hz power. 

Use of an extension cord longer than 50 ft. can 

reduce the voltage supplied to the light and can 

cause dimming.

Use 16-gauge (AWG) extension cords with 

a cord length of less than 50 ft. Have power 

supply checked b

y a qualified electrician.

We’re here to help. For assistance before returning to your retailer, call 1 (888) 575-5272.  

Hours: 9 a.m.-5 p.m., PST, Monday- Friday.

Содержание 3705414







Отзывы:

Нет отзывов