Assembly & Installation: 370-1973 | 14000LM Work Light with Tripod
Assembly & Installation: 370-1973 | 14000LM Work Light with Tripod
Attach light head fixtures to mounting bar
using (2) mounting knobs.
ASSEMBLY:
ASSEMBLY CONTINUED:
STEP 1:
Attach handle to mounting bar using 2 plastic mounting knobs.
Attach cord to handle with screw.
STEP 4:
Loosen locking knob and pull
legs away from the ceter pole
until all legs are fully extended.
Retighten locking knob firmly.
Note: It is possible to utilize tripod
without legs fully extended, as long
as all 3 outer legs touch the ground,
however full extention is highly
recommmended for maximum
security and sturdiness.
STEP 2:
Attach portable stand to tripod by pinching red buttons in.
Align holes on the underside of the light bar with locking
tabs on tripod stand. Release red tabs to lock.
*Use product with or without tripod stand at any time, using the
quick release red buttons to detach or reattach the light heads!
Make sure the portable light bar is connected completely to the locking
tabs on the tripod stand. Lift the portable handle to confirm. Failure to
complete this step may cause injury or damage to the lights.
STEP 3:
NOTE:
Step 1
Step 2
NO
YES
