background image

What is the SmartNet X+ 16x16 

 

 

The SmartNet X+ range of products are designed to switch and transmit high resolution computer video 

 

and/or audio signal over CAT-5 wire. AV stands for Audio Visual and includes such signal formats as 

 

Broadcast Video (TV video signal), Computer Video (VGA, SVGA, XVGA and etc. signals) and various for

 

mats of Audio signals.  

 

 

 

The Smartnet X+ 16x16 products provide an unprecedented range of switching and distribution equip

 

ment for all formats of video. By combining the features of 

 

High quality Video and Stereo Audio matrix 
Signal distribution via Cat 5 cable 

Interactive Infrared control and RS232 pass-through 

 

 

creates an extremely powerful and cost effective product for use in high quality Video switching, 

 

security and data distribution. Housed in standard 19” rack mounting cases, various models are available 

 

allowing multiple configurations and applications providing a high quality signal conversion from the 

 

Cat 5 cable to the plasma, computer or other display device. 

 
 

Why is the SmartNet X necessary? 

 

Sometimes there is a need for the ability to switch between a selection of multiple inputs and multiple  

outputs with the required AV signals able to be transmitted over distances greater than commonly    
specified product limitations of 5m. In this case several choices are available, but most are expensive   

and bulky, which is some cases is simply not practical, due to space limitations in the conduits. The  

SmartNet X product range allows the transmission of AV signals over a standard CAT-5 UTP cable over 

distances of up to 300m. The actual distance is a function of the signal resolution and a cable quality.   

The following is a rough guide to distance and resolution:

 

 

Introducing SmartNet Router/Extender 

Cat 5 Cable Length 

Maximum Recommended  

Resolution 

150m 

1600 x 1200 

225m 

1280 x 1024 

250m 

1024 x 768 

300m 

800 x 600 

Page 2 

How does SmartNet X+ work? 
 

The SmartNet X and SmartLynx receivers are high resolution components of a UXGA extender system   

designed for the switching and transmitting desktop computer video and stereo audio signals over (UTP) 

unshielded twisted pair category 5 (CAT 5) cabling. The transmitted signals are computer video signal, an 
RGBHV (Red, Green, Blue and Horizontal and Vertical Sync) analog format, and a Stereo Audio. The basic 

concept behind this product is the ability to encode and decode analog signal combined with precise line 

equalization and compensation. 

 

Smart-e (UK) Ltd, Ranmore Manor, Ranmore Common, Dorking, Surrey, RH5 6SX 

+44 (0) 1483 283365 Fax: +44 (0) 1483 281511, www.smart-e.co.uk

 

Содержание SNX-16x16 X+































Отзывы: