MDX MATRIX SERIES USER MANUAL V2.0
© 2016 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 12
1
FRONT PANEL INDICATORS
Power LED
–
Solidly Lit Green When Power Supplies Operating Correctly
Active LED
–
Pulses Amber When Internal Processor Is Running
Sensor
–
Infrared Sensor to Control Matrix Functionality
2
INPUT PORTS
Location of MDX Input Blades
3
OUTPUT PORTS
Location of MDX Output Blades
4
KEYPAD CONTROL INPUT
4-way input for control keypad
5
ETHERNET PORT
Ethernet port enabling connection of matrix to LAN and allowing control over TCP/IP
6
D9 CONNECTOR
–
RS232 In Control Port
Used to connect MDX to control system (PC/SmartiP/3
rd
Party Controller)
7
D9 CONNECTOR
–
RS232 Out Port
Can be used to interconnect control systems where feedback or status is required from the MDX
8
EARTHING POINT
9
SYSTEM IEC INLETS
Power supply inlets to power the internal boards of the MDX (AC 100
–
240V 50/60Hz)
10
POC IEC MAINS INLETS
Power supply inlets to power remote transmitter and receiver units (TX/RX 4K-866s
–
24V)
11
BLANK SOCKET
–
NO BLADE CAN BE INSERTED IN THIS SLOT
12
INFRARED SWITCH SLOT
–
Contact Smart-e for More info on Infrared Applications
