4K-KVM USER MANUAL V1.1
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 7
2
CHASSIS PANEL DESCRIPTION
2.1 TRANSMITTER
1) Power input port
2) Power input indicator
3) USB
4) HDMI input
5) Ethernet port
6) Fiber Out
7) Indicator of status
8) IR-RX port
9) IR-TX port
10) RS232 port
11) Normal: For serial over IP;
Program: For serial control or getting the debug information
12) 4 bit Dip switch
13) Group Switch
14) Button 1 & 2
A. Green LED: Link LED, when the connection has established over
Cat5e/6 cable or Fiber cable, the Green LED will illuminate.
B. Yellow LED: When the yellow LED is blinking, it indicates the conne ction has been established over Cat5e/6 cable.
When the green LED illuminates, it indicates the connection has bee n established between transmitter and receiver
over fiber cable.
After select the DIP switch, press
“
Group Sw
itch”
button for 1
second.
Please refer to 5.3.
4 bits DIP Switch:
Use 4bits DIP switch to select 16 groups ID (such as 0001, 0010, 0101 etc)
