Single end pins are used for installing the desktops because
they do not share the same pin hole locations. Note that the
top shelf shares the same pin hole locations, so double ended
pins are used.
Double ended pins are used for all because shelves and desk-
tops share the same locations.
Installing accessories
SMARTdesks.com
9
800 770 7042
Install WM-WWC18 Wire Wonder with 3 screws using pilot holes
provided. If no pilot holes are provided, use a spacer and center
the WireWonder in the work area, in line with the grommets
for wire management on the side panels. Use 1/8” drill bit and
depth gauge to avoid drilling though panel.
Position power strip above WireWonder and install with long
screws. Test fit your screws to ensure they won’t pop out the
other side. Panels are 1/2” thick.
Phillips drive, 5/8” #8 thread wood screws are used
for attaching Wire Management. 3 are supplied for
each WM-WWC18.
