Quick Start Instructions
Need Set-up Help? (800) 650-3637
S M A R T C A R E G I V E R C O R P O R AT I O N
Tel: 800-650-3637
| www.smartcaregiver.com
TL-5102TP
3
Select the Pager Alert Tone
1
Install Batteries into the Pager
2
Install Batteries into the Call Buttons
Insert two new,
AA batteries into
the pager.
Insert a new A23-12V battery into
each of the call buttons.
Gently pry each call button open
with a lathead screwdriver on the
bottom of the button to access
the battery compartment.
Front
Inside
Slide the switch on the
side of the pager to select
a chime tone or a alarm
tone alert.
A23-12V
6
Lanyard Strap Use
Lace the lanyard strap through
the top of call button
Wrap the loop around the
dark blue cord and pull tight
Call Button
Push for Help
The call button should hang
from the strap
Top view of
Call Button
5
Wall Mount Use with Mounting Brackets
Call Button
Call Button
Mounting Bracket
A. Wall Mount with Double Stick Tape
The mounting brackets may be aixed
to most smooth, clean surfaces with the
included double stick tape.
B. Wall Mount with Screws (not included)
The mounting bracket may be more securely
mounted to walls or headboards with screws.
Use the recessed guides for screw placement on
the bracket
Screw
Guides
Double
Stick Tape
(Back of
Bracket)
4
Test the System
Press the call button
to test
The pager will sound
the alert tone when
either of the call
buttons are pressed.
NOTE: THE END USER IS RESPONSIBLE FOR TESTING THE
SYSTEM AT IT’S FURTHEST RANGE OF USE.
