SMART Board SPNL-4055, Руководство пользователя

Страница: 19 / 46

CHAPTER 3
CONNECTING POWER AND DEVICES
13 smarttech.com/kb/170800
IMPORTANT
Do not connect the power cable to a power outlet until you have connected all cables to the
interactive flat panel.
Configuring touch and display settings for your
interactive flat panel
If you’re using multiple displays or a laptop connected to the interactive flat panel, ensure that they
are set up correctly.
Check the graphics card configuration (see Graphics card configuration below).
Check the panel settings (see Panel settings below).
Calibrate or clear previously set calibration data.
Graphics card configuration
If you’re using an unsupported graphics card configuration, you may experience display problems
or issues with touch accuracy. For example, you may experience issues if your graphics card
scaling option is set to something other than full-screen.
IMPORTANT
If you're using an ATI video card, go to the ATI Catalyst Control panel's Flat Panel menu, select
Pixel Format and change it to RGB 4:4:4 timing.
Panel settings
Ensure that you set Screen Mode to 16:9 or Full, and that you select the correct input source.
To select input
Press Input on the interactive flat panel’s side panel or remote control, and then use the
arrows to select the correct input source.