Chapter 2
Installing the display
25
TIP
If you’re using the display’s
LAN
RJ45
jack to connect to a network, you can
connect the other RJ45 jack to a
computer to provide network access for
the computer. This is particularly useful if
there is only one wired network
connection in the room. (Network access
is available when Networked Standby is
selected in Settings but not when
Standby is selected.)
You’ll also need to work with your organization’s network administrators to configure the network for the
display, see
Connecting a SMART display with the iQ experience to a network
Connecting power and turning on the display for the
first time
The final step in installing and configuring the display is to connect power and turn it on. When you first turn
on the display, a setup wizard appears. Follow the steps in the wizard to complete the setup.
