Chapter 2
Installing the display
26
To connect the display to power
Connect the supplied power cable from the AC power
inlet on the back of the display to a power outlet.
NOTE
Refer to the display’s specifications for power requirements and power consumption information (see
To turn on and set up the display for the first time
IMPORTANT
Install the OPS PC module before you turn the display on.
NOTE
If a USB drive is connected to the display’s service port, do not remove the USB drive. The USB drive
contains an important firmware update.
1. Flick the switch beside the AC power inlet to the ON (I) position.
2. Press the
Power
button
on the front control panel or remote control
3. Select your preferred language, and then tap
Next
.
4. Select your country, and then tap
Next
.
5. Select your time zone, and then tap
Next
.
6. Set the date, and then tap
Next
.
7. Set the time, and then tap
Next
.
8. Name the display, and then tap
Next
.
