2/4 Port KVM MST with Dual or Quad 4K HDMI Out
6
1. Ensure that power is turned off or disconnected from the unit and the computers.
2. Use a
DisplayPort cable
to connect the DP output port from each computer to the
corresponding DP IN ports of the unit.
3. Use a
USB cable (Type-A to Type-B)
to connect a USB port on each computer to the
respective USB ports of the unit.
4. Optionally connect a
stereo audio cable
(3.5mm to 3.5mm) to connect the audio output
of the computers to the AUDIO IN ports of the unit.
5. Connect a monitor to the HDMI OUT console port of the unit using a
HDMI cable
.
6. Connect a
USB keyboard and mouse
in the two USB console ports.
7. Optionally connect stereo speakers to the AUDIO OUT port of the unit.
8. Finally, power on the KVM by connecting a
12VDC power supply
to the power
connector, and then turn on all the computers.
installation
Application diagram SM-MST-2S
The SM-MST-2S converts a single DisplayPort 1.2 input signal to two separate HDMI Output
connections through advanced MultiStream Transport technology. This allows a user to extend their
display and achieve resolutions of up to 4K (3840 x 2160 @ 30 Hz) on each connected monitor
without from single DP port.
Part No.
Description
SM-MST-2S
2 Port KVM MST with Dual 4K HDMI Out. Includes: [SM-MST-2S-S; PS12V2A]
