CONNECTING THE E-300
1. Ensure that power is disconnected from E-300.
2. Connect the HDMI inputs to HDMI signal source.
3. Optionally connect either LAN or RS-232 for control functions.
4. Connect E-300 to network switch.
5. Optionally connect E-300 to a display via HDMI or VGA output to preview streaming content
6. Power on the SaviStreamer E300.
CONTROLLING THE E-300
Front Panel Control
To switch ports using the front panel, press the
UP
button to navigate up and
DOWN
button for down.
RS-232 Control
Use a male-to-female serial cable to connect a com-
puter to the RS-232 port of the E-300. Use terminal
client software to connect to the E-300
.
Make sure
to use the standard communication mode of 9600
bps, 8, N, 1, N. This port can also be used for soft-
ware upgrade.
TCP/IP Commands
TCP/IP commands control E-300 via web browsers.
To activate TCP/IP, connect to the E-300 using
SmartAVI’s SaviStreamer Manager software from a
central PC workstation. Simply select the unit you
wish to control, and make operational adjustments
as you see fit.
INSTALLATION DIAGRAM
E-300 FRONT
E-300 BACK
