Unit Password
When connecting a new SaviStreamer device to your network environment, you must manually
assign it a Unit Password. Unit Passwords match the Environment Passwords by default, so just enter
the active Environment Password to establish connections.
Updating Passwords
To change or adjust passwords, simply open the Settings tab in SaviStreamer Manager and click
‘Change Password’. Provide the old password you wish to change, then input the desired new password,
and confirm it to complete the update. When updating your Environment Password, all connected
SaviStreamer devices’ Unit Passwords will also update to the new Environment Password.
For more information about password protection, please contact SmartAVI’s Technical Support team.
Managing Streams and Environment
Managing SaviStreamer Devices
E300 Encoders will automatically be detected by the SaviStreamer Manager. If it is unable to
detect any SaviStreamer encoders on the network, the software also allows for adding new
SaviStreamer encoders to your streaming environment by clicking the Add button (+) in the top left
corner of the manager and input the unit’s *IP address.
Once SaviStreamer Manager has discovered
your E300 Encoder and displays a ‘Ready’ message, simply double click the device
and a new settings
page will open. Listed below are details of each tab where the settings can be customized to your
preference, or simply use the default settings provided and click ‘Start encoding’ to begin streaming!
*If you are unsure of a device’s I
P address, please use Network Finder, a free device IP finder available at
www.smartavi.com/helpful-links
Processing Control
Optimize streams by assigning signal settings for your media. This includes:
•
Capture: audio-video recording settings, such as resolution and sampling rates.
•
Encoding: customizable video and audio settings for enhanced formatting as H.264 media.
•
Streaming/Recording: Signal assignment for specific ports and remote IP streams.
Output Control
Assign streams to display on locally connected devices; adjust display settings for optimized
playback.
Network control
Assign connection settings for optimal performance over a given network. Assign dynamic or
static IP addresses. By default, IP addresses are assigned dynamically (DHCP)
RS-232 Control
Enable communication between remote SaviStreamer devices and RS-232 connected
workstations.
Содержание SaviStreamer E300
Страница 1: ......
