6
HARDWARE INSTALLATION (P100 Pro)
1. Connect an HDMI monitor to the HDMI connector on the P100 Pro with an HDMI cable and power on
the display.
2. Connect the supplied power adapter to the P100 Pro and plug it in.
3. Optionally connect a USB keyboard and Mouse to the P100 Pro.
4. Connect the RJ45 connector on the P100 Pro to your network with a CAT5e/6 cable or connect to the
P100 Pro with WIFI.
5. Power on the P100 Pro by pressing the power button on the front of the unit and wait for the P100
Pro to initialize.
Initial set up using the IR Remote Control:
1. Press the menu button on the supplied remote control. Use the arrows on
the remote to highlight “Find local server” and press the ok button on the
remote.
2. If the P100 Pro does not find your servers IP address automatically you must
manually enter it. For example, if your server is in a remote location not on
your local area network you will need to enter the IP address manually.
3. Select and click “SAVE”.
Initial set up using a USB Keyboard & Mouse:
1. Press [CTRL] & [Esc] to display the P100 Pro menu.
2. Press [Esc] or right click the mouse to turn off the on screen keyboard.
3. Use the arrow keys to select “Find local server” and Press [Enter} to execute
the selection or use the mouse to left click on the “Find local server” slider
to execute the selection.
4. If the P100 Pro does not find your servers IP address automatically you must
manually enter it. For example, if your server is in a remote location not on
your local area network you will need to enter the IP address manually.
