Connecting the RK-DVX2U
1.
Power off all devices.
2.
Connect two DVI-D sources (computer) to each of
the 8 DVI-D ports on the rear of the RK-DVX2U-TX
labeled and .
3.
Connect an audio source to each of the 8 audio
ports on the rear of the the RK-DVX2U-TX labeled
.
4.
Connect two USB sources to each of the 8 USB
ports on the rear of the the RK-DVX2U-TX labeled
.
5.
Connect the RK-DVX2U-TX to the the DVX2P-RX
with four STP (Sheilded Twisted Pair) cables using
each the front ports labeled and the
rear ports labeled .
6.
Connect a DVI monitor to the ports on the rear of
the DVX2P-RX labeled and .
7.
Connect an audio device to the port on the
DVX2P-RX labeled .
RK-DVX2U-A
DVX2P-RX
USB FLASH DRIVE
USB KEYBOARD USB MOUSE
SPEAKERS
DUAL DVI-D
MONITORS
COMPUTERS
up to 225 ft
over 4 STP cables
Introduction
The RK-DVX2U-A is the perfect solution for extending
dual DVI-D displays, Audio and USB 1.1 devices to a
remote location up to 225 feet away. It is the ideal way
to consolidate up to 8 workstation computers into one
location. The RK-DVX2U-A features dual DVI-D extension
up to 225 feet over STP. It is fully compatible with MAC,
PC and LINUX DVI standards. The RK-DVX2U-A features
transparent USB 1.1 signal extension, with full support
for all USB 1.1 devices and an integrated 4-port hub in the
receiver. Flash Drives, Printers, Cameras, Scanners, etc.
may all be used with the RK-DVX2U-A. The RK-DVX2U-A
is designed to work in conjunction with the DVX2P-RX
receiver unit. Up to 8 receivers may be used with the RK-
DVX2U-A, depending on the application.
Applications
•
Medical Applications
•
Industrial Work Areas
•
Home Theater Integration
•
Digital Signage Deployment
•
Information Kiosks/Displays
•
Film/Recording Studios
Features
•
Supports up to 2 DVI-D single-link sources
•
Supports Mac, PC, and Linux DVI
•
Supports High Resolution 1920x1200 60Hz
WUXGA
•
Distance: 225 feet with four CAT6 STP cables
•
Uses universal DVI Single Link connectors
•
Zero pixel loss with TMDS signal correction
•
DDC from internal table for Mac/PC
•
Supports all USB 1.1 Devices Transparently
(Flash Drives, Printers, etc.)
•
Supports USB 1.1 keyboard and mouse
•
Compatible with all operating systems
•
Compatible with all major KVM switches
•
Rack Mountable Solution
•
Data recovery for digital video
•
Supports 1.5 and 12Mbps data rates
•
Plug-and-play
Product - Installation Diagram
The following is the wiring standard for terminating UTP/STP
cable using RJ-45 connector:
Connectors:
RJ-45
Capacitance:
14 pf/ft (46.2 pf/m)
Conductor Gauge:
24 AWG
Impedance:
100 +/- 15 ohms
Pair 1
Pins 1 & 2
Pair 2
Pins 3 & 6
Pair 3
Pins 4 & 5
Pair 4
Pins 7 & 8
1
2
1
2
1
2
8.
Connect up to 4 USB 1.1 devices to the ports on
the DVX2P-RX labeled .
9.
Connect the power to the ports labeled
POWER
110-240V
on the RK-DVX2U-TX and on
the DVX2P-RX.
10.
Power on the computers, displays and USB 1.1
devices.
