Introduction
The RK-DVX-Plus is the perfect solution for extending
DVI-D and USB 1.1 signals to a remote location up to
275 feet away. It is the ideal way to consolidate up to
16 workstation computers into one location. The RK-
DVX-Plus features DVI-D extension up to 275 feet over
STP. It is fully compatible with MAC, PC and LINUX DVI
standards.
The RK-DVX-Plus also features transparent USB 1.1 signal
extension, with full support for all USB 1.1 devices and
an integrated 4-port hub in the receiver. Flash Drives,
Printers, Cameras, Scanners, etc. may all be used with the
RK-DVX-Plus.
Applications
•
Medical Applications
•
Industrial Work Areas
•
Home Theater Integration
•
Digital Signage Deployment
•
Information Kiosks/Displays
•
Film/Recording Studios
Features
•
Supports DVI-D single-link
•
Supports Mac, PC, and Linux DVI
•
Supports High Resolution 1920x1200 60Hz
WUXGA
•
Distance: 275 feet with three CAT6 STP cables
•
Uses universal DVI Single Link connectors
•
Zero pixel loss with TMDS signal correction
•
DDC from internal table for Mac/PC
•
Supports all USB 1.1 Devices Transparently
(Flash Drives, Printers, etc.)
•
Supports USB 1.1 keyboard and mouse
•
Compatible with all operating systems
•
Compatible with all major KVM switches
•
Rack Mountable Solution
•
Data recovery for digital video
•
Supports 1.5 and 12Mbps data rates
•
Plug-and-play
The following is the wiring standard for terminating UTP/STP
cable using RJ-45 connector:
Connectors:
RJ-45
Capacitance:
14 pf/ft (46.2 pf/m)
Conductor Gauge:
24 AWG
Impedance:
100 +/- 15 ohms
Pair 1
Pins 1 & 2
Pair 2
Pins 3 & 6
Pair 3
Pins 4 & 5
Pair 4
Pins 7 & 8
Connecting the RK-DVX-Plus
1.
Power off all devices.
2.
Connect DVI-D sources (computers) to each of the
16 DVI-D ports on the rear of the RK-DVX-Plus-TX
labeled
3.
Connect USB sources to each of the 16 USB ports
on the rear of the the RK-DVX-Plus-TX labeled
4.
Connect the RK-DVX-Plus-TX to the the DVX2U-RX
with three STP (Sheilded Twisted Pair) cables using
each the front ports labeled
5.
Connect a DVI monitor to the port on the rear of
the DVX-Plus-RX labeled
6.
Connect up to 4 USB 1.1 devices to the ports on
the DVX-Plus-RX labeled .
7.
Connect the power to the ports labeled
POWER
110-240V
on the RK-DVX-Plus-TX and on
the DVX-Plus-RX.
8.
Power on the computers, displays and USB 1.1
devices.
RK-DVX-Plus
DVX2U-RX
USB FLASH DRIVE USB KEYBOARD USB MOUSE
16 DVI-D
DISPLAYS
COMPUTERS
up to 275 ft
over 2 STP cables
Product - Installation Diagram
