SmarLink FW50, Руководство пользователя

Страница: 3 / 28

Shenzhen Newchiba smartlink Technology Co., Ltd. www.newchiba.com
2
Ⅰ
. Device Connection
When users get a router, first use the pin to stick the small yellow dot next to the SIM card slot to
popup the card slot and install the SIM card, and then install the six antennas (5.8g*2,2.4g*2,4g*2)
corresponding to the antenna logo and the silkscreen logo on the antenna port of the device. Then connect
the power and press the switch to start the router. When the 6 indicators of the router are all on, which
means start and connect 4g network successfully, users can connect the WIFI router with computer or
mobile phone to surf the Internet. The factory default device settings is 3G/4G
mode.
Ⅱ
. Device Login
After the computer or mobile phone is connected to the router, open the browser and enter
192.168.5.1 in the address bar of the browser. Then click OK, there will be a login box, in which users
can enter the username admin, and password admin (username and password should be lowercase). After
entering the username and password, click login, and users can enter the router’s background
management page.
In the pop-up login box, fill in the username and password. The username and password are both