SMARC SC107, Руководство по обслуживанию, Страница: 6 / 50

1. General Maintenance
1) SMARC products require only the most basic general maintenance, performed on an as-
needed basis every 6~8 months.
2) Minimum qualifications of SERVICE PERSONNEL: Only technicians trained by PMHC and
associated distributors are supposed to do maintenance. Please contact PMHC factory or
local authorized dealer for maintenance.
The MANUFACTURER will make available on request circuit diagrams, component part lists, descriptions,
calibration instructions, or other information that will assist SERVICE PERSONNEL to repair those parts
of ME EQUIPMENT that are designated by the MANUFACTURER as repairable by SERVICE PERSONNEL.
2. Recommended Cleaning (optional)
1) With the system turned OFF, wipe down all surfaces with a damp cloth. Neutral detergent
and water can be used to remove stains and scuff marks. Inspect all locking and adjustment
mechanisms for signs of damage.
2) NOTE : DO NOT use cleaning solutions containing ammonia or alcohol to clean. Neutral
detergent and water should be sufficient. Allow the system to dry thoroughly before
resuming operation.
CH3 Preventive Maintenance
4