SMAR MB-700, Руководство пользователя

Страница: 32 / 116

MB-700 – User’s Manual
3.2
8. Write down the original IP address and the subnet mask of the workstation so the user will be
able to restore them at the end of this operation.
9. Change the IP address and the sub net mask of the PC so it is located in the same Subnet of the
MB-700. Preferable the IP addresses used must be supplied by the Network administrator.
NOTE
Values must be of the type: IP Address 192.168.164.XXX and subnet mask 255.255.255.0. Keep
the value for Default Gateway.
ATTENTION
Do not use the address 192.168.164.100 once it is the default address used by the MB-700.
10. Click the
OK button.
11. Run the FBToolsWizard.exe (located in the working directory of Smar) directly from the shortcut
“FBTools Wizard”, or directly using the shortcut “FBTools Wizard”.
12.
Select the MB-700 device and click Next .
Figure 3.2 – FBTools Wizard – Choose Device
13. Click the
Connect button to see the modules are available.