SMAR DC302, Руководство по эксплуатации и техническому обслуживанию владельца

Страница: 28 / 49

DC302
– Operation and Maintenance, Instruction Manual
3.12
Idx Parameter
Data Type/
(Length)
Valid Range/
Options
Default
Value
Units
Store/
Mode
Description
110 ERROR_CODE Unsigned8
0 - Logic Ok.
1 - Exceed
String Length or
string not valid.
2 - Non valid
operand.
3 - No
implemented
logic or missing
';'
4 - Missing
parentheses or
argument not
valid.
5 - Non valid
resource.
6 - Argument not
valid.
7 - Function not
valid
8 - Non available
resource.
9 - Non valid
attribution.
10 - First
Argument not
valid.
11- Second
Argument not
valid.
3 - No
implemente
d logic or
missing ';'
Na S
Indicated the code for the error in the logic
line.
111 CHANGE_OPTION Unsigned8
0 - Logic
parameter
changes are
only allowed in
Out of Service.
1 - Always
accept Logic
parameter
changes.
0 - Logic
parameter
changes are
only allowed
in Out of
Service.
Na S
Enable logic parameter changes
independent of Mode Block parameter
112 UPDATE_EVT DS-73 Na D
This alert is generated by any change to the
static data.
113 BLOCK_ALM DS-72 Na D
The block alarm is used for all configuration,
hardware, connection failure or system
problems in the block. The cause of the alert
is entered in the subcode field. The first alert
to become active will set the Active status in
the Status attribute. As soon as the
Unreported status is cleared by the alert
reporting task, another block alert may be
reported without clearing the Active status, if
the subcode has changed.
Legend:
E
– Enumerated parameter;
Na
– Admensional parameter;
RO
– Read only;
D
– dynamic;
N
– non-volatile;
S
– Static
Gray Background Line: Default Parameters of Syscon
The following table describes the Logic Operation and Command line and the correspondent
Symbols used in the logic line: