Smappee Energy – Installation manual - English
15
Voltage reversing (optional)
•
If all 3 input voltages remain negative after the phase mapping changes,
reverse them by clicking ‘run voltage reverser’.
•
If due to circumstances, one or more CTs could not be installed in the correct
direction, please reverse the input using the Phase reverser checkbox.
Press ‘test’ to
update the
change(s)
temporarily.
Click ‘save changes and restart metering engine’. Otherwise, the changes to the
configuration will not be saved.
Validate the configuration. Refresh (press F5) the webpage and log in again to the
Expert Portal to see if all changes are saved and the configuration is correct.
Final check:
•
Activate a high consuming appliance of which you know the power
consumption. E.g. vacuum cleaner or coffee machine.
•
Verify the power increase in the yellow bubble in the Smappee App. If this is not
correct, the phase mapping is incorrect.
•
If you are not able to get the correct configuration, please contact your local
distributor.
Inform your local distributor if you have doubts about your phase mapping.
3
4
5
6
