1. If you have not yet activated lens mapping on CTRL.1, visit
your controller’s UID to generate a license key.
2. From the controller, navigate to
LENS>LENSMAP
and select one of the configured lens maps. If you
have not yet created a lens map, follow the instructions here:
https://player.vimeo.com/video/
3. Firmware
1.4
and earlier : Press the MENU button to return to the main menu, then navigate
to
ADV>SMALLHD.
Select
YES
to activate SmallHD Comms.
4. Firmware
1.5
and later: Press the MENU button to return to the main menu, then navigate to
IO
CONFIG
, select
SMALLHD
, and press SET.
CONNECT A CABLE FROM THE CONTROLLER’S WIRED MODE CONNECTOR TO THE MONITOR’S USB
PORT:
• 5-pin to micro-USB for Focus (part number 11-1469)
• 5-pin to 5-pin for 703/703 Bolt
• 5-pin to USB-A for larger monitors
CONFIGURE YOUR MONITOR:
1. Tap the screen on the monitor and navigate to
ADD NEW TOOL>ADD ONS
.
2. Select
TERADEK RT
.
3. The Lens Map Overlay will appear on the right and move according to the controller’s knob
movements.
ABOUT:
• The Teradek RT tool appears when a lens map is selected. If no lens map is selected, no information
will be displayed on the monitor.
• The focus units will match those configured on the controller unless overridden by the
Focus Units
option in the Teradek RT tool configuration.
• The overlay only displays the axis that is currently being controlled by CTRL.1.
SmallHD User Manual
Page 2
RT Teradek Motion Overlay PagesOS 4
