SMA Windy Boy 5000, Руководство по эксплуатации

Страница: 35 / 70

SMA Technology AG Turbine operation
Operating instructions WB50_60-11:FE4105 Page 35
The correct configuration of the parameters above is absolutely necessary to
guarantee optimum operation with generators from different manufacturers.
Preconditions for changing the operating parameters are described in chapter 6.4
"General setting example” (page 37).
Name WB 5000 WB 6000 Unit Description
UpvStart 300
(250 ... 600) 300
(250 ... 600) V
DC
Defines the voltage at the
moment when the Windy
Boy 5000 / 6000 is ready to
perform a mains supply
synchronization.
UdcWindStart 330
(1 ... 800)
330
(1 ... 800) V
DC
Defines the voltage at the
moment when the Windy
Boy 5000 / 6000 is ready to
begin feeding power into the
mains supply.
UdcWindMax 550
(1 ... 800)
550
(1 ... 800) V
DC
Defines the voltage at the
moment when the Windy
Boy 5000 / 6000 begins
feeding maximum power
into the mains supply.
P-Wind-Ramp 500
(10 ... 2000) 500
(10 ... 2000) W/sec Controls a delayed startup
of the characteristic curve,
only after the Windy Boy
5000 / 6000 has been
switched on. This avoids the
generator being suddenly
presented with a heavy
load.
T-Start 10
(5 ... 1600) 10
(5 ... 1600) sec Start Timer Mains
synchronization.
T-Stop 2
(1 ... 3600) 2
(1 ... 3600) sec Stop Timer Aborting the
supply of power and
switching off.
To perform the configuration process, the DC input voltage must be greater
than <UpvStart> and the Windy Boy 5000 / 6000 must be connected to the
mains supply.