DaNGEr!
Electric shock from high voltage at inverter.
Even when no external voltage is present, there can still be high voltages in the device.
The following work must be carried out by qualified personnel only:
•
Electrical installation
•
Repairs
• Modification
CaUTION!
risk of injury from touching the enclosure during operation.
Burns to the body.
•
Only touch lid and display during operation.
CaUTION!
Yield loss due to poor heat dissipation.
•
Do not place any objects on the enclosure.
SafETY INSTrUCTIONS
DIaGraM
POWEr DISPLaY
MEaSUrEMENT aCCUraCY
The power and energy of the inverter are displayed in the three fields: Power, Day and Total. The
display is updated every five seconds.
Power
Current inverter power output fed into the grid.
Day
The energy fed into the grid on this particular day. This means the
energy total from midnight to the current time.
Total
Total energy which the inverter has fed into the grid during its entire
operating time.
The inverter energy is shown as a diagram on the display. The
daily graph is displayed by default. The right-hand flashing bar of
the diagram represents the current hour. In case the inverter does
not feed any power into the grid for a prolonged period (e.g.
when the wind is calm), a gap is inserted into the graph. The bar
for the current hour is updated automatically every five seconds.
After four seconds, the bar goes off for one second and then
displays the current value.
The display values may deviate from the actual values and must not be used as a basis for invoicing.
The inverter's measured values are required for the system management and to control the current to
be fed to the grid. The inverter does not have a calibrated meter.
GraPhIC DISPLaY
PLaNT OVErVIEW
Current output
Daily energy
Total energy generated since the inverter was installed
Text line for displaying an event
Graphical display of the inverter energy
The display updates the values of your small wind turbine every five seconds.
Tapping on the cover:
• Activating the background illumination
• Switching from the energy values of the past 16 feed-in
hours to daily energy values of the past 16 days
• Switching through the line display
Failure
Contact installer
Switch open: no feeding
Switch closed: feeding
Grid voltage/
current
Bluetooth
connection with other devices
DC voltage/
current
Grid event number
Event number, small wind turbine system
Event number, inverter
Power reduction due to excessive temperature
•
Cleaning the fan
•
Provide better ventilation for inverter
LED
Green LED is glowing: Operation
Green LED is flashing:
Network connection conditions not yet reached.
Red LED is glowing:
Failure: contact installer.
Blue LED is glowing:
The inverter has been incorporated into a
Bluetooth
network and can
communicate with other devices with identical NetID.
Blue LED is flashing:
The inverter was identified with Sunny Explorer by setting the "Find device"
parameter.
PrODUCT OVErVIEW
Top enclosure lid
Lower enclosure lid
Graphic display
Electronic Solar Switch
LEDs
Serial number
Identification of Windy Boy using type plate
