SMA TEMPSENSOR-AMBIENT, Руководство по установке

Страница: 11 / 16

SMA Solar Technology AG Electrical Connection
Installation Guide TempsensorAmb-IEN110610 11
5. Remove resistance and bridge at the " F6: TmpAmb "
terminal in the Sunny SensorBox.
6. Connect the Ambient Temperature Sensor to the
" F6: TmpAmb " terminal of the Sunny SensorBox.
Please note the indicated wire colors (see page 9).
7. Check that the cable gland grommet is correctly in
place.
8. Fasten the lock nut onto the cable gland manually
to affix the cable (torque: 0.8 Nm).
9. Lay the cable using suitable fixing material.
10. Place the Sunny SensorBox enclosure lid on the
lower enclosure shell.
11. Fasten screws manually (torque: 1 Nm) into the
lower enclosure shell.
☑ The Ambient Temperature Sensor has been
connected to the Sunny SensorBox.